How To Take Out Contact Lenses
When you first insert your contact lenses, they should feel comfortable. Any discomfort could be an indication that they have been inserted incorrectly. If you have soft lenses, you might be able to correct the situation by moving the lens around a bit with either your finger or simply by blinking your eyes a few times.
With rigid lenses, you might have to take them out, apply a bit of solution and try again. In some cases, just adding a few drops of solution directly to your eyes while the lens is still in will help. The added moisture could slide the lens into a more comfortable position.
To take out your lens, put your finger onto the lens and just take it out. The lens should stick more to your finger than your eye because by this time, it could be quite dry. If you have any trouble, try holding your eye open while removing the lens and wet your finger.
Putting in and taking out your contacts will take a bit of practice. The more often you do it, the easier it will become. Just like with anything else – the more you practice, the easier it gets. The full report can be read here.
After you take out your lenses, place them directly into their holding boxes. You don’t want to put them down anywhere else because they will get dirty or covered with germs. Make sure you always have enough solution in your contact lenses boxes.
The lenses should be covered with solution. If there isn’t enough in the box, add more. Close the lid tightly so that your lenses will not accidentally fall out. Finding a contact lens on your dresser or on the floor is nearly impossible. Most contact lenses are clear glass, therefore blend into the surroundings. Plus, they are extremely small.
If you have the disposable type of contact lenses, then you don’t have to worry about the storage box, the solution or risk of losing them. Of course, you don’t want your floor covered with lost contact lenses, but since you have a box of new pairs, you won’t have to worry about buying a replacement pair.